Need to replace a broken tile? Learn how in a few simple steps.
Tools & Materials
Take a grout rake and remove the grout around the tile that's being replaced
Break & Remove Tile
Once the grout is gone, break the tile up with a hammer. Lift up any stuck pieces with a chisel, and clean the area.
Dry-Fit New Tile
Dry-fit your new tile before adding adhesive.
Apply Adhesive & Level
Apply adhesive to the back using a notched trowel, then press the tile in place. Use a level to make sure it's even.
Apply Grout & Smoothen
When adhesive is dry, push grout into joints & smoothen. Use a lightly dampened sponge to remove excess grout.
Apply Grout Sealer
After 24 hours, apply grout sealer. Your new repair is finished!